The industrial overhead crane manufacturer is used in a wide range of scenarios, and it is an essential equipment for many factories such as machining and mold assembly. How much do you know about the taboos of using overhead traveling crane suppliers? Let’s take a look at the “ten not hanging” of monorail overhead crane cost with Sevencrane.
(1) The signal command is unclear and does not hang up. Unknown signal command is mainly for air-operated cranes with cabs. Since the objects to be hoisted are far away from the operators, it is necessary to communicate with colleagues below in a timely manner, or set up a driving operation commander on the ground to give timely instructions to the air operators above. For personnel command signals, at present, with the lightweight design and user-friendly operation of industrial overhead crane equipment, there are basically few air-operated cranes with cabs.
(2) cable-stayed, obliquely hung, not hung. Oblique pulling and hanging is the main illegal operation method during the use of overhead traveling crane supplier. During the cable pulling process, the protective device may be damaged, and the steel wire rope may be cut, as well as uncertain external force on the crane structure, which is extremely harmful.
(3) The load weight is unknown or the load is overloaded. Under normal circumstances, the unknown weight and overload need not be considered, because the current electric overhead traveling crane for sale needs to add an overload limiter according to the specification. The limiter is a very important protection element. During the daily maintenance of the vehicle, it is necessary to check whether the limiter is normal and effective. During the operation of the vehicle, it is necessary to judge the approximate weight of the suspended object, so that it is well known.
(4) The loose objects are not tightly bound or the materials are not loaded. Cultivate good habits in the process of operating top running overhead crane price, and operate according to the requirements and specifications. Don’t be afraid of trouble or have a fluke mentality. The consequences of lifting heavy objects, especially molten metal, are self-evident.
(5) No one is allowed to hang on the hanging object
(6) Objects buried underground are not allowed to hang. Things buried in the ground or heavy objects connected to the ground will cause devastating damage to the driving when the monorail overhead crane cost is lifted.
(7) It is not allowed to hang if the device fails. The device is the line of defense to protect the electric overhead traveling crane for sale. 90% of the failures of the hoisting machinery are caused by the failure of the device, and the failure of the device may cause heavy casualties. Therefore, manufacturers who use monorail overhead crane cost should do regular maintenance.
(8) It is not allowed to hang the hoisting objects at the lifting and lowering points if the scene is dimly lit;
(9) It is not allowed to hang the edged objects in direct contact with the wire rope without protective measures. This is also a major accident hazard.
(10) Do not hang explosive items, and strong winds above level 6 are not allowed to hang. Strong winds mainly refer to outdoor gantry cranes, because strong winds may cause the overhead traveling crane supplier to lose control and cause accidental injuries.
The industrial overhead crane manufacturer’s “ten not hanging” is the experience summed up from years of lessons. As an operator, you must keep it in mind.