Structure and types of gantry cranes

The gantry crane is a bridge-type crane in which the horizontal bridge is set on two legs to form a gantry shape. This kind of crane runs on ground tracks and is mainly used for handling and installation operations in open storage yards, shipyards, power stations, ports, railway cargo stations, etc.

The structure of gantry crane
The hoisting mechanism, trolley operating mechanism and bridge structure of the floor mounted gantry crane price are basically the same as those of the bridge crane. Due to the large span, most crane operating mechanisms adopt separate driving methods to prevent the crane from skewing and increasing resistance and even causing accidents. The lifting trolley of the gantry crane runs on the bridge frame, and some lifting trolleys are just jib-type cranes. The legs on both sides of the bridge are generally rigid legs; when the span exceeds 30 meters, one side is often a rigid leg, and the other side is a flexible leg connected to the bridge through a ball hinge, making the gantry a statically determined system. , This can avoid additional stress caused by lateral thrust under the action of external load, and can also compensate for the longitudinal temperature deformation of the bridge. The gantry crane has a large wind area. In order to prevent sliding or overturning under the action of strong wind, it is equipped with anemometer and floor mounted gantry crane system rail clamp interlocked with the operating mechanism. The bridge can be without cantilevers at both ends; it can also be cantilevered at one end or with cantilevers at both ends to expand the operating range. The semi-gantry crane bridge has outriggers at one end and no outriggers at the other end, and runs directly on the high platform.

갠트리 크레인의 종류
① Ordinary floor mounted gantry crane supplier: This kind of crane has a wide range of uses and can transport various items and bulk materials. The lifting capacity is less than 100 tons and the span is 4 to 35 meters. Ordinary gantry cranes with grab buckets work at a higher level.
②Hydropower station gantry crane: mainly used for lifting and opening and closing gates, and can also be used for installation operations. The lifting capacity reaches 80-500 tons, the span is small, 8-16 meters, and the lifting speed is low, 1-5 meters/min. Although this kind of crane is not frequently lifted, the work is very heavy once it is used, so the work level must be appropriately increased.
③Shipbuilding gantry crane: used for assembling ship hulls on the slipway. There are two lifting trolleys: one has two main hooks, running on the track on the upper flange of the bridge; the other has a main hook and an auxiliary hook, on the The bridge runs on rails on the lower flange to facilitate the flipping and lifting of large hull segments. The lifting capacity is generally 100 to 1500 tons; the span is up to 185 meters; the lifting speed is 2 to 15 meters/min, and there is also a micro-movement speed of 0.1 to 0.5 meters/min.

④Floor mounted gantry crane equipment: 컨테이너 터미널에 사용됩니다. 트레일러는 안벽 컨테이너 운반 다리를 통해 선박에서 하역된 컨테이너를 마당 또는 후방으로 운반한 후 컨테이너 갠트리 크레인에 의해 쌓이거나 직접 적재 및 운반되어 컨테이너 운반 다리의 회전율을 가속화할 수 있습니다. 다른 크레인. 높이 3~4단, 폭 6열의 컨테이너를 쌓을 수 있는 야드는 일반적으로 타이어형이지만 레일형도 사용된다. 컨테이너 스트래들 트럭과 비교하여 컨테이너 갠트리 크레인은 마스트 양쪽의 스팬과 높이가 더 큽니다. 항만 터미널의 운송 요구를 충족시키기 위해 이러한 종류의 크레인은 작업 수준이 더 높습니다. 리프팅 속도는 35~52m/min입니다. 스팬은 교차해야 하는 컨테이너 행 수에 따라 결정되며 약 60m입니다. "싱글 박스" 작업을 위한 컨테이너의 리프팅 용량은 약 40.5톤이고, "더블 20피트 컨테이너" 작업의 리프팅 용량은 약 40.5톤입니다. 리프팅 용량은 61톤과 65톤의 두 가지 사양으로 제공됩니다.