Introduction to wall cranes (lifting capacity up to 6.3 tons)

Wall mounted jib crane support workshop processes, and for adjacent workshops our wall-mounted jib cranes are the ideal workstation cranes. They can transport materials to various workstations and can also be used for positioning operations at assembly stations. This type of crane operates under an overhead crane on crane rails that run up and down the workshop walls.

Other features:
● Cantilever length up to 12 meters
● Load capacity up to 6.3 tons
● Connect the flashlight door or wireless remote control via cable
● The traveling unit composed of Codergen drive components has first-class traveling characteristics
● Traveling wire rope hoist on cantilever support.

Sevencrane wall mounted jib crane (equipped with 3.2 ton wire rope hoist) for mechanical assembly workstation below 50 ton overhead crane.
Rigid bracket and crane main beam design
● Rigid design of closed box structure

First class walking characteristics
● Suitable for high loads due to low tolerances on track center distance differences, offset and alignment
● Since the horizontal and vertical traveling units adopt a torsion-resistant closed box structure, low vibration operation can be achieved
● Vertical travel unit with perfectly matched Demag components
● Equipped with a Kedelgen parallel-shaft reduction motor (the frequency converter of which can change polarity or speed), it has excellent walking power
● Equipped with a drive connected to the road wheel box, so the torque transmission is smooth and there is no radial force
● The low-maintenance Kedeleng traveling wheel box system with self-lubricating ductile iron traveling wheels can minimize the wear of the crane rails and traveling wheels.

Equipped with special traveling wire rope hoist for industrial wall mounted jib crane
● Equipped with special traveling wire rope hoist for cranes
● Full utilization of available height and space thanks to compact design (minimum extreme dimensions and long hook travel)
● Small swings during transport thanks to variable travel and lifting speeds
● Due to the comprehensive monitoring of CAN Bus technology, the operation efficiency is high and can meet future requirements (preventive maintenance)

Ergonomic controls
● The transportation process is safe and the operator does not feel tired
● Optional cable-connected flashlight door – height adjustable and can be walked independently on the main beam of the crane
● Optional wireless remote control system with corresponding buttons – operates on variable radio frequencies to achieve wireless control without interference to radio transmission and reception

Optional linkage operation
● Particularly suitable for transporting heavy and difficult loads
● Use one transmitter for master/slave control of two cranes
● For safety reasons, the operation of two cranes can be stopped simultaneously

Optional double trolley operation
● For example, for transporting long materials
● Use one transmitter to control two traveling hoists
● For safety reasons, the operation of two traveling hoists can be stopped simultaneously

system integration
● Integrated into intralogistics concept

Modular design
● Higher quality and higher reliability due to the Codergen modular system
Two top manufacturer wall mounted jib crane on the first floor serve the assembly workshop via nearly 100 meters of track.