Underhung Monorail Crane Operation Essentials and Techniques

SEVENCRANE underhung monorail crane is a major lifting and transportation equipment in the production logistics process, and its utilization efficiency is related to the production rhythm of the enterprise. At the same time, bridge cranes are also dangerous special equipment and may cause harm to people and property in the event of an accident.

The driver of the industrial underhung monorail crane is the most active and critical factor in the use of the overhead crane. The driver’s ability to operate the overhead crane is very important and is a major issue directly related to the company’s efficiency and safe production. The author summarizes his own practical experience in operating bridge cranes and puts forward the following operating experience based on the characteristics of bridge cranes.

Master the characteristics of equipment and work objects

To correctly operate a bridge crane, you must carefully master key elements such as the equipment principle, equipment structure, equipment performance, equipment parameters, and operating process of the equipment you are operating. These key factors are closely related to the use and operation of this equipment.

1. بر اصل تجهیزات مسلط شوید

درک دقیق اصول، پیش نیاز و پایه عملکرد خوب تجهیزات است. تنها زمانی که اصول به وضوح و عمیقا تسلط پیدا کنند، پایه های نظری ایجاد شود، درک واضح و عمیق باشد و سطح عملیات می تواند به ارتفاع معینی برسد.

2. با دقت به ساختار تجهیزات مسلط شوید

تسلط دقیق بر ساختار تجهیزات به این معنی است که شما باید اجزای ساختاری اصلی جرثقیل پل را درک کرده و به آن مسلط شوید. جرثقیل های پل تجهیزات ویژه ای هستند و ساختار آنها ویژگی های خاص خود را دارد که باید به دقت درک و تسلط داشته باشد. تسلط دقیق بر ساختار تجهیزات، کلید آشنایی با تجهیزات و کنترل ماهرانه تجهیزات است.

3. به دقت بر عملکرد تجهیزات مسلط شوید

To carefully grasp the performance of the equipment is to master the technical performance of each mechanism of the top 10 underhung monorail crane for sale, such as the power and mechanical performance of the motor, the characteristic braking state of the brake, and the safety and technical performance of the safety protection device, etc. Only by mastering the performance can we better take advantage of the situation, scientifically control the equipment, delay the deterioration process, and prevent and reduce the occurrence of failures.

4. به دقت بر پارامترهای تجهیزات مسلط شوید

تسلط دقیق بر پارامترهای تجهیزات به این معنی است که شما باید پارامترهای فنی اصلی جرثقیل پل از جمله نوع کار، سطح کار، ظرفیت بالابری نامی، سرعت کار مکانیزم، دهانه، ارتفاع بالابر و غیره را درک کرده و به آن مسلط شوید. پارامترهای فنی هر قطعه تجهیزات اغلب متفاوت هستند. بسته به پارامترهای فنی تجهیزات، تفاوت هایی در عملکرد آن وجود دارد. آگاهی دقیق از مقادیر دقیق پارامتر برای هر جرثقیل سقفی برای عملکرد دقیق تجهیزات بسیار مهم است.

5. به دقت بر روند کار مسلط باشید

Carefully mastering the operating process means mastering the steps and processes of the production operations served by the جرثقیل پل, and striving for the best design and reasonable operation of the lifting and transportation procedures used in various processes. Only by proficiently mastering the process flow can we master the operation rules, be confident and operate freely, so as to improve work efficiency, safety and reliability.

Grasp the status changes of the equipment

The warehouse underhung monorail crane cost is special equipment, and the operation and operation must ensure the technical status and intact condition of the bridge crane. During the operation of bridge cranes, they are affected by factors such as production conditions and environment. The functions and technical status determined during the original design and manufacturing may continue to change and be reduced or deteriorated. Therefore, the driver must carefully grasp the status changes of the equipment, conduct good operation control of the bridge crane, and perform maintenance and inspections carefully to prevent and reduce failures.

1. تغییرات وضعیت تجهیزات را با دقت درک کنید

تجهیزات باید با دقت نگهداری شوند. تمام قسمت های جرثقیل پل را به طور مرتب مطابق با الزامات سیستم تعمیر و نگهداری تمیز، تمیز، روغن کاری، تنظیم و سفت کنید. با مشکلات مختلفی که در هر زمان رخ می دهد به موقع مقابله کنید، شرایط عملیاتی تجهیزات را بهبود بخشید، مشکلات را در جوانه قرار دهید و از تلفات بی مورد جلوگیری کنید. تمرین ثابت کرده است که عمر تجهیزات تا حد زیادی به درجه نگهداری بستگی دارد.

2. تغییرات وضعیت تجهیزات را با دقت درک کنید

تغییرات وضعیت تجهیزات را با دقت درک کنید و بتوانید تجهیزات را بررسی کنید. قسمت هایی از جرثقیل پل که نیاز به بازرسی مکرر دارند را بشناسید و تسلط داشته باشید و بر روش ها و ابزارهای بازرسی قطعات مسلط شوید.

3. Skills in monitoring equipment through senses

Skills in monitoring equipment through the senses, i.e. seeing, hearing, smelling, touching and feeling. “Visual” means to use vision to observe the surface of the equipment in order to detect intuitive defects and failures. “Listening” means relying on hearing to detect the status of the device. The driver operates in the cab and cannot see the operating conditions of the equipment on the bridge. Hearing becomes an important auxiliary safety means. When electrical appliances or mechanical equipment are operating normally, they generally only emit very light harmonic sounds, but when they are malfunctioning, they will make abnormal noises. Experienced drivers can determine the approximate location of the fault based on the different changes in the sound. Therefore, identifying diseases by sound should be one of the internal skills of a driver. “Smell” means relying on the sense of smell to detect the status of the device. The electrical coil of the bridge crane catches fire, and the brake pads smoke and emit a pungent odor that can be smelled from a distance. If you find any peculiar smell, you should stop the vehicle immediately for inspection to avoid causing fire or other major equipment accidents. “Touch” is to diagnose the abnormal status of the equipment through hand feeling. Drivers sometimes encounter abnormal conditions in equipment and are able to diagnose and determine the cause of the malfunction. “Feeling” here refers to feel. Drivers will feel information from all aspects when operating, and experience will tell you what is normal and what is abnormal. When drivers find that they feel different from usual at work, they should immediately trace the source to avoid future troubles.

Communicate carefully with ground support personnel

The use of operating bridge cranes to complete lifting tasks requires the cooperation of many people such as drivers, commanders, and rigging personnel. Sometimes its operating scope also includes other equipment and operators, so as a driver, you must carefully work with the ground. Communicate and cooperate well with the personnel. The work objects, equipment status, work instructions, and operating environment must be confirmed before proceeding.

The driver must confirm the command language with the ground personnel before operating. If the command language is not agreed upon, the operation cannot be carried out. The driver must concentrate when operating and operate according to the commander’s signals. Before each operation, the driver should ring the bell to remind the personnel at the operation site to pay attention. At the same time, pay attention to the situation around the lifting objects. No one is allowed to stay under the hoisted object, under the arm, or in the area where the hoisting weight rotates. When the line of sight between the driver and the hoisted object may be blocked during hoisting, the driver should carefully inspect the on-site environment within the hoisting range and confirm the hoisting path of the hoisted object before hoisting. During the hoisting process, the signal contact with the commander should be strengthened.

At the same time, the commander should stand within the driver’s line of sight to give commands to avoid hoisting safety accidents due to blocked sight. If there are only drivers and hookers working on site, the driver must work closely with the hookers and work in unison. When moving and lifting heavy objects, you should only follow the signal given by the hooker. However, no matter who sends the “stop” signal, you should stop immediately.