Proyecto de instalación de grúa pórtico

Grúa pórtico de una sola viga installation project
1. Before installing the gantry crane, all ground anchors must be inspected and accepted. Installation can only be carried out after passing the inspection.
2. Select two qualified truck cranes for installation according to the installation requirements of the Fabricante de grúas pórtico de una sola viga.

Gantry crane installation acceptance and process safety management
Sevencrane single beam gantry crane factory installation acceptance:
1. Before installation: Whether the installation qualifications and installation plan comply with the installer’s certificate, and whether the ID card matches the installer’s safety education and disclosure.
2. Installation process: The installation process is monitored, and a dedicated person stands by to supervise the installation personnel with regular safety education and explanations. Organize and carry out special safety inspections for installation.
3. Installation is completed: organizers, acceptance personnel, and acceptance units arrive at the site for on-site acceptance. The safety device shall be inspected and accepted through trial operation.
4. Trial operation: Operators and commanders must hold certificates to work, and check whether the certificates match. Safety education and briefing for operators and commanders.
5. Safety device acceptance.

Gantry crane safety control visualization
1. Site closure and warning for hoisting operations.
2. Big hook safety warning color.
3. Visualization of limits such as iron shoes, rail clamps, and infrared sensors.
4. Big hook ground anchor visualization.

5. Set retaining rings on the upper and lower ladder passages and hang anti-fall devices.
6. Special operation personnel must hold a certificate to work, and an acceptance sign should be displayed in a conspicuous position on the machinery.
7. The ground endurance when installing the track should meet the requirements. The spacing between track joints should be ≤4mm, the height difference between the joints should be ≤2mm, and lightning protection jumpers should be installed at the joints.

Wireless remote control single beam gantry crane company disassembly and exit
Preparations before dismantling the gantry crane:
1. Set up disassembly notices for gantry cranes, remove surrounding debris, and set up cordons;
2. Select a qualified truck crane to cooperate with the disassembly according to the disassembly requirements (operators must hold certificates to work);
3. The spreaders, equipment and ground anchors used must be checked and calculated, and they can only be used if they pass the test;
4. Provide disassembly safety technical explanations, safety education and training, and arrange for dedicated personnel to supervise the whole process;
5. Turn off the power before disassembly and lower the hook of La mejor grúa pórtico de una sola viga a la venta.

Disassembly sequence:
1. Electrical disassembly; 2. Disassembly of ancillary facilities; 3. Disassembly of the driver’s cab; 4. Disassembly of the trolley; 5. Disassembly of the main beam; 6. Disassembly of the outriggers; 7. Disassembly of the track trolley; 8. Clean up and exit.