What are underhung cranes?

Underhung bridge crane are light and small cranes that run on rails. They can be installed directly on the roof structure of the existing factory building without the need for corbels. Therefore, they can save space, reduce costs, and use the entire factory space for production. It has the characteristics of compact structure, good rigidity, sensitive operation, low noise, safety and reliability.
This series of underhung cranes has a small operating limit. Heavy objects can be lifted very close to the factory wall, and can be cantilevered through the side so that the travel range of the trolley exceeds the span of the sevencrane underhung bridge crane. It is widely used in industrial and mining enterprises and warehouses. , material yards and other places.

Caracteristicas de industrial underhung bridge crane:
1. The end beam is driven by hot-rolled channel steel and bridge teeth, and is driven by double wheels, which ensures smooth operation.
2. Simple and lightweight structure, high space utilization.
3. Three-in-one buffer motor, compact structure, smooth start and low noise.
4. Rigid I-beam can optimize load distribution.
5. Can be used in specific areas of the workshop.
6. The limit size of the hook is small, and the load can be quickly lifted to a position very close to the wall of the factory building.
7. By using the outstretched cantilever, the traveling range of the trolley can exceed the span of the top manufacturers underhung bridge crane.

Where can I buy heavy duty underhung bridge crane?

Electric single-girder suspension crane is a type of single-girder crane. “Electric” refers to manual cranes. It is basically difficult to see manual cranes on the market at present, so the cranes we often talk about are all electric cranes.

“Single girder” refers to a double-girder crane. The crane girder is the power-bearing part of the crane. Cranes below 16 tons generally use a single girder for load-bearing, and cranes of 20 tons and above generally use two girder for load-bearing.

“Suspension” is a structural form of crane wheels. The wheels are suspended on the end beam. The crane model is LX. Due to its special structure, the tonnage of the suspension crane is generally 3 tons and below, and rarely reaches 10 tons. tons of suspension cranes. The wheels are under the end beam for conventional crane models LD.