Heim > Blog > Six Common Causes of Jib Crane Failures

Six Common Causes of Jib Crane Failures

Datum: 20.11.2023
Teile uns:

In a variety of lifting machinery, as a work operator will be very worried about the machinery will be prone to what hazards, what harm to the human body. Electric single girder cranes, pedestal jib crane distributors, jib cranes gantry cranes and other kinds of lifting machinery are using jib cranes as the lifting mechanism of lifting machinery. Jib cranes as a lifting mechanism, in addition to the large and small car traveling mechanism and the main force components, will be prone to failure. Common causes of jib crane failure are: overload, rope wear, mechanical failure, electrical failure, improper operation, environmental factors.


1, load overweight: the maximum load of top 10 pedestal jib crane supplierS is limited, if more than the load capacity, it is easy to fail. Solution: find out the failure point, repair it, reduce the lifting weight or replace the jib crane with larger lifting capacity.
2, rope wear: jib crane ropes need to be checked and replaced often, because long time use will lead to wear and breakage. Solution: Check and replace the ropes regularly.

3、Mechanical failure: the mechanical parts of the jib crane may fail, such as gears, bearings and other parts are damaged or out of order. Solution: Regular inspection and maintenance, repair and replacement of mechanical parts.

4、Electrical failure: the electrical system of the heavy duty pedestal jib crane manufacturer may fail, such as motor damage, short circuit of electric wires and so on. Solution: Regular inspection and maintenance, repair and replacement of electrical components.

5、Improper operation: the operator is not skilled or does not comply with the operating procedures, such as excessive acceleration or braking, operation is not smooth. Solution: Operator training for operation.

6、Environmental factors: custom pedestal jib crane factory are used in harsh environments, such as high temperature, low temperature, humidity, etc., will also affect the normal operation of the equipment. Solution: Improve the environment or replace the jib crane with higher configuration.